INDUSTRIAL KILN

Design maximum temperature: 1050℃

Operating temperature: 100-1000℃

Heating furnace tube dimensions: ￠420×￠404×7500mm (two pieces)

Heating zone length: ￠420×￠404×6000mm (2)

Cooling zone length: ￠420×￠404×5000mm

Heating zone length: 6000mm

Heating element: Silicon carbide rod (1600 type sic)

Temperature control method: Fully automatic control by intelligent temperature control instrument, with PID automatic adjustment. Use SCR for power adjustment

Temperature rise on the surface of the kiln body: ≤50℃

Number of temperature control groups: Three independent temperature control groups at the front, middle and back respectively

Temperature control accuracy: ±1℃

Furnace tube speed: 0 to 5 revolutions per minute, continuously variable frequency adjustable.

Furnace body inclination Angle: Adjustable from 0 to 3°.

Production capacity: 25-33kg/h (for reference

The designed power of the equipment is 180kw, and the heating rate is 10-20 degrees per minute

Power supply: 380V/50Hz/3P+N

The cooling method is spray water cooling

Each temperature zone of the heating system is controlled independently. Each temperature control group is equipped with a separate control switch to ensure safe and convenient operation. The current-limiting parameters can be adjusted and set.

Over-temperature alarm for each temperature zone, and the over-temperature value is adjustable. When the temperature exceeds the upper limit, the heating device can be automatically interlocked to stop.